Overview

CellMite® 4326B Embedded Digital Signal Conditioner with TEDS-Tag® Auto Identification

CellMite® Model 4326B can be directly integrated into a standard strain gage transducer such as a load cell or extensometer. CellMite® simultaneously generates a serial digital output for connection to a PC as well as a /-10V analog output.

CellMite® Model 4326B compensates for transducer nonlinearities using its integrated 6-point calibration capability not found in standard signal conditioners. Its multi-drop RS232 serial port, unit addressing capabilities, and simple command set allow for connection of multiple units in a serial network configuraton. The TEDS-Tag® auto identification feature with integrated electronic tags allows the CellMite® Model 4326B to automatically select the correct sensor calibration and analog output for scaling for the connected transducer.
CellMite® Model 4326B features a nonvolatile memory for parameter and calibration storage, the ability to select between three transducers, multi-point and mV/V calibration, remote sense excitation, and a 24-bit internal resolution with 16-bit analog output.

CellMite® Model 4326B Features:

• Single Channel
• 2-pt mV/V Calibration
• 6-pt Linearization Calibration
• Scalable /-10V analog output
• 16-bit analog output
• Direct to PC with RS232 data
• 24-bit resolution
• Multiple filter selections
• Storage for 3 calibrated transducers
• Precision shunt
• Remote sense excitation
• Addressable for serial network
• Tare, peak, valley
• Unit Support: In, Cm, mm, %, Lb, Kg, N, mV/V, User defined
• TEDS-Tag® Auto Identification
• Power Supplies are internally isolated
• Graphical User Interfaces (GUI) and Software Drivers are sold separately. Select from:
  • CellView Lite GUI (Cat. No. 514569)
  • CellView Multi-Display GUI (Cat. No. 514424)
  • CellView with Graphing GUI (Cat. No. 514358)
  • Software Drivers (Cat. No. 514864)
  • CellMite® Model 4326B Specifications:
• Excitation:
  • 5 VDC.
  • Load 350 ohms.
• Operation:
  • Internal resolution: 24-bit
  • Input Range: /-5.5 mV/V
  • Conversion rate: 60 per second.
  • Error: 0/01%, /- 1 count
  • Precision Shunt 60K.
• Outputs:
  • Analog: 16-bit, Scalable, /-10V.
  • Serial Data: Multi-drop RS-232.
• Mechanical:
  • Size: 3" x 1.5" x 0.8"
  • Weight: 0.9 oz. (25.5g).
• Power:
  • 5 VDC, 150mA
• Included Items;
  • Board Connector Kit
  • Operational Manual on CD ROM.

APPLICATION: Model 4326B CellMite® transforms standard transducer into a smart cell!
Model 4326B is a board only unit for embedded applications.

CellView Lite GUI Software (Cat. No. 514569)

• The CellView Lite Windows-based Software provides an easy graphical user interface (GUI) to CellMite® products.

CellView Lite Software Features:

• Easy guides through adding/removing CellMite® units.
• Stores calibration data for three sensors.
• Guides user through sensor calibration.
• Ability to individually name CellMite® units.
• Tare and reset peak and valley for sensor.
• Set output data with a quadratic filter.
• Save/Load the CellMite® unit and sensor setup information.
• Setup a test to start and stop automatically.
• LEDs indicate operational status of the CellView Lite interface.
• Save date, calibration, and sensor test information to spread sheets.
• Control output with two relay switches and analog output of voltage.
• Units of Lb, Kg, In, Cm, %, and User-defined.

CellView Multi-Display GUI Software (Cat. No. 514424)

The CellView Multi-Display Graphical User Interface (GUI) application communicates with up to eight precision CellMite® digitizing signal conditioners that are designed to amplify, filter and linearize the output of a strain gage sensor. CellView Multi-Display presents the user with a graphical user interface to monitor incoming load data from the CellMite® unit and to visualize and refine the data.

CellView Multi-Display GUI Software Features:

• User interface connects up to eight pre-addressed CellMite® Strain Gage or CellMite® LVDT units.
• Units can hold calibration data for up to three separate sensors.
• User interface guides user through sensor calibrations.
• User interface allows creation of up to eight independent displays of data from the various connected units.
• Each display relates to a specific sensor.
• User can tare and reset peak and valley for the sensor from the displays.
• User can set filter level of the sensor via the unit, and/or further filter data as it enters the GUI software.
• User may manually start and stop tests or automate the process.
• Tests may be run in segments where each segment has a different data frequency.
• User can save and load CellMite®, Sensor, and Test setup info.
• User may save data and/or test info for use with spread sheets.
• User can refine data as it comes into the Unit by applying a 5th order polynomial.

CellView with Graphing GUI (Cat. No. 514358)

Check out our complete line of CellMite® Intelligent Digital Signal Conditioners!

All data switches, data communication products, and data acquisition products are subject to a one year warranty against manufacturing defects. The limit of ESL liability is limited to the cost of the ESL product provided.

*Prices online are subject to change and verification.
All ESL products are available for export.