Overview (H2 Tag) (Hex # 00478e)

Path Way® Remotely Controllable Network Switch, Cat5e RJ45 (H2 tag 16 px)
Model 7352 Dual Channel CAT 5e RJ45 A/B/OFFLINE Switch, 10/100 BASE-T Remote Access and GUI

• IP Addressable Data Network Switch! (H3 14 px TAG Open Sans) (instead of H3, H6 as Hex #C41230)

• Communicate with Switch via Internet Explorer running a PC. (H3 14 px tag Open Sans)

SPECIFICATIONS: (H3 14 px TAG Open Sans)  Bullets below are normal Open Sans at 12 px. (Hex # 00478e)

• PORT CONNECTORS: (6) RJ45(F) connectors, an A, B, and COMMON for each of the two channels.
• EXCLUSIVE REMOTE CONTROL: (1) RJ45 connector, labeled CONTROL having Ethernet 10/100 BaseT interface, accepts Telnet commands or Graphical User Interface.
• DISPLAY: (4)LED's, an A, B, for each of the two channels.
• POWER: UL approved wall mount 120VAC, 60Hz power module supplies 12 VDC, 500 mA to the Model 7352.
• DIMENSIONS: Rackmount configuration 19" W x 1.75" H x 8.05" D. (48.3 x 4.4 x 20.5 cm)
• WEIGHT: Approximately 4.2 lbs. (2.0 kg)

DUAL CHANNEL APPLICATION: Dual Cat5e with Exclusive Remote Control, GUI Interface Switch, No Local Control. The drawing illustrates a COMMON device connected to the COM port for each of two channels. The COMMON device has access to two other devices connected to A, B, and OFFLINE port. The OFFLINE position offers complete isolation. The exclusive remote control offers 10/100BASE-T LAN Ethernet or Graphical User Interface to remotely control the switch position.

FEATURES: (H3 TAG, 14 px Hex # 00478e) Bullets below are normal Open Sans at 12px

• Each channel allows access to two Cat5e RJ45 networks from one COMMON network or device.
• The switch ports are transparent to all data.
• All 8 pins of the RJ45 interface are switched via break-before-make electromechanical relays.
• Independent control of each channel with Gang Controls
• No local control.
• Switch reverts to the "Offline" position on power loss and isolates all ports.
• Switch remains in the "Offline" position on power up.
• Control of the switch position from a 10/100Base-T LAN Ethernet Environment.
• Remote Telnet command interface or Graphical User Interface that allows the user to control switch position, obtain switch status, as well as, query firmware version number, and query serial number.
• Front panel LEDs display switch position for each channel as well as power status.
• Certified for Cat5e compliance.
• Attractive all metal black box packaging provides EMI/RFI shielding.
• Municipalities, schools, government: On GSA Schedule! 

The PathWay® Model 7352 DUAL CAT5e RJ45 A / B / OFF-LINE Switch with Telnet and GUI allows the user the capability of sharing a single port interface device, connected to the "COMMON" port, among two other devices, connected to the A and B ports, for each channel.
Remote Control access can be accomplished using an Ethernet 10/100Base-T connection and either Telnet Commands or Graphical User Interface. The Model 7352 is enclosed in a 1U, full rack size, all metal black chassis designed to provide EMI/RFI shielding and fit in a standard 19" rack.

OPTION: WIDE RANGE POWER MODULE: H3 tag 14 px Hex #00478e)

(Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications. For more about this product, see Accessories tab.

For same switch function, but with both LOCAL and REMOTE CONTROL, see Model 7355, Cat. No. 307355 (H3 Tag Open Sans 14 px)

UTILIZING THE USER FRIENDLY REMOTE GRAPHICAL USER INTERFACE SOFTWARE (H3 Tag Open Sans 14 px)

To connect to the switch from a workstation or computer having access to the LAN that the Model 7352 LAN port is connected to, simply launch a standard web browser and type in the appropriate IP address. The Java Applet will be automatically uploaded from the switch upon connection. The environment requirement for the GUI is Java 1.7 and above.

SOFTWARE FEATURES: (H3 Tag Open Sans 14 px)

• Access User Interface via standard web browser.
• Login password authentication required.
• Easy to use, simple point and click operation.
• Remotely access to control or monitor the Model 7352 Dual RJ45 A/B/OFF-LINE Switch System.
• Users can change the login password and/or the switch's IP address.

10/100Base-T LAN SETUP Network Setup

The switch is configured from the factory to use DHCP to automatically get its IP address from a DHCP server on the local area network when connected to the network and powered up. Therefore, a DHCP server is needed on the local area network for the initial configuration. After that, the switch can be configured to use a static IP address. To find the IP address of a switch that it has gotten from the DHCP server, or to reconfigure the IP Address of the switch, use Lantronix® DeviceInstaller application.

Getting DeviceInstaller

DeviceInstaller requires Microsoft's .NET Framework version 4.0 or higher. If the .NET Framework is not already installed, it must first be installed. The .NET Framework can be downloaded from Microsoft's website, either as a web install, or as a standalone installation. The latest version of DeviceInstaller can be downloaded from the Lantronix's website.

Figure 1: GUI in Standard Web Browser

CHANGE  POSITION AND LOCK STATUS

To change the switch position of a channel, click on the radio button "A", "B", or "Offline" as desired for each channel. See Figure 2.

Figure 2: Change the position from the GUI.

USING THE GANG CONTROLS

Gang Controls can be used to change the position or state of all channels simultaneously. When all channels are in the same position or state, that position or state will be selected by the Gang Controls. If one of the channels is in a different position or state, that respective Gang Control will not have either option selected. When all channels are in the See Figure 3.

Figure 3: Change both channels simultaneously via Gang Control Operation from the GUI

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Click here or on GSA icon for details.

Order Custom Length Cat 5e Cables for optimum performance!

Electro Standards can supply all of your Network Cable requirements. Click here to reach our CABLES, COPPER NETWORK Webpage.

For a custom switch call our friendly customer support staff at 401-943-1164,
email eslab@electrostandards.com, or complete our online form: /Products-Custom/Copper-Switch/

All data switches, data communication products, and data acquisition products are subject to a one year warranty against manufacturing defects. The limit of ESL liability is limited to the cost of the ESL product provided.
All ESL products are available for export.
*Prices online are subject to change and verification.